Paper tube compression testing machine basic maintenance methods
Below as KEPIN instrument website editor for compressive tester class would you recommend basic maintenance methods, hope to for your compression testing machine maintenance work plays a certain help.
1. The operator should read the instructions and strictly comply with operation procedures;
2. Keep the machine working environment clean;
3. The machine failure, should ask professional to check out, do not to run in spite of;
4. Adhere to periodic verification and keep the machine good technical state. Test cycles are usually for one year;
5. Don't regularly intermittent gas lubrication for machine moving parts;
6. When printing paper roll out or print the handwriting is not clear, should replace the paper roll or printing ribbon.
7. The carton compression testing machine two drive screw must pay attention to maintain proper lubrication, with 50 # machine oil, lubricating oil refueling must apart two columns openings of the dustproof cover, use brush besmear to brush, with oil does not flow down.
8. The carton compression testing machine drive chain should be timely refueling, with 50 # machine oil, lubricating oil refuelling machine can be tilted backward to make it the base, use brush dips in besmear to brush in a chain at the bottom of the base oil, the oil should not be too much, not to flow down.
As KEPIN website editor for your recommended above compressive tester class the basic maintenance methods, hope to for your compression testing machine maintenance work plays a certain help.
